Chicago Electric 94739 Assembly and Operations Instructions download pdf (Page 8)

SKU 94739 For technical questions, please call 1-800-444-3353 Page 8

EXTENSION CORDS

1. Grounded, 230 VAC tools require a three wire extension cord.

2. As the distance from the supply outlet increases, you must use a heavier gauge extension cord. Us-

ing extension cords with inadequately sized wire causes a serious drop in voltage, resulting in loss of

power and possible tool damage. (See Figure B, below.)

3. The smaller the gauge number of the wire, the greater the capacity of the cord. For example, a 10

gauge cord can carry a higher current than a 12 gauge cord. (See Figure B.)

4. When using more than one extension cord to make up the total length, make sure each cord con-

tains at least the minimum wire size required. (See Figure B.)

5. If you are using an extension cord outdoors, make sure it is marked with the sufﬁx “W-A” (“W” in

Canada) to indicate it is acceptable for outdoor use.

6. Make sure your extension cord is properly wired and in good electrical condition. Always replace a

damaged extension cord or have it repaired by a qualiﬁed electrician before using it.

7. Protect your extension cords from sharp objects, excessive heat, and damp or wet areas.

SYMBOLOGY

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 19 20

No comments

Chicago Electric 94739 Assembly and Operations Instructions Page 8