Chicago Electric 94739 Assembly and Operations Instructions download pdf (Page 2)

SKU 94739 For technical questions, please call 1-800-444-3353 Page 2

Speciﬁcations

Save This Manual

You will need the manual for the safety warnings and precautions, assembly instructions, operating and

maintenance procedures, parts list and diagram. Keep your invoice with this manual. Write the invoice num-

ber on the inside of the front cover. Keep the manual and invoice in a safe and dry place for future reference.

General Safety Warnings and Precautions

WARNING: When using tool, basic safety precautions should always be followed to reduce the

risk of personal injury and damage to equipment.

Read all instructions before using this tool!

Work Area Safety

1. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.

2 Do not operate power tools in explosive atmospheres, such as in the presence of ﬂam-

mable liquids, gases, or dust. Power tools create sparks which may ignite the dust or fumes.

3. Keep bystanders, children, and visitors away while operating a power tool. Distractions

can cause you to lose control. Protect others in the work area from debris such as chips and sparks.

Provide barriers or shields as needed.

Electrical Safety

4. Grounded tools must be plugged into an outlet properly installed and grounded in accor-

dance with all codes and ordinances. Never remove the grounding prong or modify the plug

in any way. Do not use any adapter plugs. Check with a qualiﬁed electrician if you are in

doubt whether the outlet is properly grounded. If the tool should electrically malfunction or break

down, grounding provides a low resistance path to carry electricity away from the user.

5. Avoid body contact with grounded surfaces such as pipes, radiators, ranges, and refrigera-

tors. There is an increased risk of electric shock if your body is grounded.

6. Do not expose power tools to rain or wet conditions. Water entering a power tool will increase

the risk of electric shock.

7. Do not abuse the Power Cord. Never use the Power Cord to carry the tool or pull the Plug

from an outlet. Keep the Power Cord away from heat, oil, sharp edges, or moving parts.

Replace damaged Power Cords immediately. Damaged Power Cords increase the risk of electric

shock.

Power

Requirement

230VAC, Single Phase, 60 Hz, 60

Amps

Max Power

(Instant)

10KVA

Secondary

No Load

Voltage

8.8V - 9.5V Max. Working

Current

(Instant)

1300 A

Timed Work

Mode

Timed Range: 0 - 1.2 sec. Required

Electrical

Plug

3-Prong, 230 VAC, Polarized, Twist Lock, 60

Amps for maximum output (not included)

Included

Accessories

(6) Electrode Tips, Slide-pull Ham-

mer, (2) Hook Tips, (3) Carbon Rods

Duty Cycle 15% Spot Welding at Max. Output Power

40% Carbon Warming at Min. Output Power

Dimensions 17”L x 11”W x 11”H Net Weight 63 Lbs.

1 2 3 4 5 6 7 ... 19 20

Comments to this Manuals

No comments

Chicago Electric 94739 Assembly and Operations Instructions Page 2

Comments to this Manuals

Related products and manuals for Welding System Chicago Electric 94739 Assembly and