Chicago Electric 91223 Operations Instructions download pdf (Page 8)

SKU 91223 Page 8

Warning:

There are certain applications for which this tool was designed. Harbor Freight Tools strongly recommends that

this tool not be modified and/or used for any application other than which it was designed.

All accessories must be rated for at least the RPM speed recommended on the tool’s warning label.

Wheels and other accessories running over rated speed can fly apart and cause injury.

For safest operation, it is recommended that only these accessories be used with this product:

Abrasive Cut-Off Discs and Wheels Flap Wheels

Wire Brushes Wire Wheel Brushes

Always use an approved and proper guard when using the above mentioned accessories. Each accessory

must have the correct arbor size and must fit properly on the shoulder bushing. Make sure accessories

are tightened down securely.

CAUTION: NEVER INSTALL A CARBIDE TIPPED OR STEEL CIRCULAR SAW BLADE

FOR USE ON THIS ANGLE GRINDER. NEVER INSTALL A WOOD CARVING BLADE,

CARVING DISC WITH SAW CHAIN CUTTERS, OR A CUTTING CARVING DISC ON THIS

ANGLE GRINDER.

UNPACKING

When unpacking, check to make sure the following parts are included. All sizes listed below are ap-

proximate. If any parts are missing or broken, please call Harbor Freight Tools at the number on the

cover of this manual. Refer to parts diagram at end of manual.

Item # Description Qty.

N/A Grinder 1

29 Side Handle 1

28 Wrench 1

2 Grinding Wheel 1

N/A Spare Brushes 2

SYMBOLOGY

Double Insulated

Canadian Standards

Association

Underwriters

Laboratories, Inc.

Volts Alternating Current

Amperes

No Load Revolutions

per Minute (RPM)

V ~

xxxx/min.

1 2 3 4 5 6 7 8 9 10 11 12 13 14

No comments

Chicago Electric 91223 Operations Instructions Page 8